YOKOGAWA 701210 User Manual Download Page 249

Page: 249 / 747

6-31

IM 701210-05E

Triggering

Setting the Bit Patterns of LOGIC A and LOGIC B

(Only When Using Logic Input Channels)

Press the

Logic Pattern

soft key. The Logic Pattern setup dialog box appears.

Use the

jog shuttle

and

SELECT

to select the pattern of each bit (Bit A1 to Bit

A8 and Bit B1 to Bit B8) from H, L, and X.

Setting the Trigger Level

10.

Press the

Select CH

soft key. The channel selection menu appears.

11.

Use the

jog shuttle

and

SELECT

to set the channel to assign the trigger level.

12.

Press the

Level

soft key.

13.

Use the

jog shuttle

and

SELECT

to set the trigger level.

14.

Likewise, set the trigger level for all channels for which patterns were assigned

in step 6.

Note

The trigger level setting applies to both simple and enhanced triggers.

Setting the Hysteresis

15.

Press the

Hysteresis

soft key to select

, or

Setting the Hold Off

16.

Set the hold off time according to the procedures given in section 6.4.

Note

The pattern settings of condition B apply to all trigger types.

6.14 Setting the B > Time, B < Time, or B TimeOut (Pulse Width) Trigger (ENHANCED)

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 701210

Reviews:

YOKOGAWA 701210, User Manual, Page: 249 / 747

Search results

Summary of Contents for 701210

Reviews: