YOKOGAWA 701210 User Manual Download Page 112

Page: 112 / 747

3-9

IM 701210-05E

Making Preparations for Measurements

3.4 Connecting the Power Supply

Connecting the DC Power Supply to the DC Power Supply Model (/DC)

WARNING

• Connect the DC power cord after checking that the power switch of the

instrument is turned OFF. If you connect the power cord with the power switch

turned ON, sparks may be emitted and can lead to fire.

• To prevent the possibility of electric shock or fire, be sure to use a power cord

and power connector that YOKOGAWA specifies.

• Make sure to perform protective earth grounding to prevent electric shock.

CAUTION

• There is a polarity to the DC power connector. Check the polarity when making

a connection. If you have trouble connecting it, do not force it; check the

connector direction.

• To prevent shorting the power supply, remove the power cord from the power

supply when the power supply is not in use.

Creating the Power Cord

Create a power cord using the power connector that comes with the package. For the

power cord, use a cable that is between AWG12 (conductive cross-sectional area of 3.3

) and AWG14 (conductive cross-sectional area of 2.1 mm

) with an outer diameter

less than or equal to 3.6 mm.

There are two types of terminal tips. Use the tip with a small diameter for the protective

grounding terminal.

Remove the two screws from the DC power connector.

Press the latch pawl in the direction of the arrow as shown and remove the

connector case. Take out the cable cover that is stored in the connector.

Cable cover

Latch pawl

Cable retainer

Remove the two cable retainer screws.

Run the cable through the cable cover.

Solder the power cable to the three terminal tips provided. Solder the protective

grounding cable to the tip with the small diameter.

Power Cable

Terminal tip

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 701210

Reviews:

YOKOGAWA 701210, User Manual, Page: 112 / 747

Search results

Summary of Contents for 701210

Reviews: