manualshive.com logo in svg

YOKOGAWA 701210, User Manual, Page: 161 / 747

Share
Download
YOKOGAWA 701210 User Manual Download Page 161

5-1

IM 701210-05E

Horizontal and Vertical Axes

5

Chapter 5

Horizontal and Vertical Axes

5.1

Turning Channels ON/OFF

Procedure

MEASURE CURSOR

RESET

SELECT

CH

ALL  CH

MODE

POSITION

SIMPLE/ENHANCED

ACQ

START/STOP

SETUP

DISPLAY

ZOOM

DUAL

CAPTURE

HISTORY

MATH

 1

CH

 2

CH

 3

CH

 4

CH

 5

CH

 6

CH

 7

CH

 8

CH

 9

CH

 10

CH

 11

CH

 12

CH

 13

CH

 14

CH

 15

CH

 16

DELAY

MANUAL  TRIG

V/DIV

TIME/DIV

TRIGGER

TRIG  D

VERTICAL

HORIZONTAL

CAL

X-Y

SEARCH

7

DSP 1

8

9

DSP 2

6

5

4

1

0

2

3

ENTER

m

DSP 6

DSP 5

LOGIC  A

LOGIC  B

EVENT

DSP 3

DSP 4

EXP

GO/NO-GO

ACTION

FILE

SHIFT

1.

Press a key from 

CH1 

to 

CH16 

keys to select the desired channel.

To select a logic waveform, press 

SHIFT+CH9 (LOGIC A) 

or 

SHIFT+CH10

(LOGIC B)

.

To select an event waveform, press 

SHIFT+CH11 (EVENT)

.

To select a DSP channel (optional), press 

SHIFT + CH1 (DSP1)

 through 

SHIFT

+ CH6 (DSP6)

.

2.

Press the 

Display 

soft key to select ON or OFF.  You can also turn ON/OFF the

channel by pressing 

CH1 

to 

CH16 

twice.

Explanation

Input waveforms of CH1 to CH16, LOGIC A, and LOGIC B, DSP1 to DSP6 (optional),

and event waveforms can be displayed simultaneously.

For channels (CH1 to CH6) that are turned ON, the LED above the key illuminates.

Note

•

The screen can be split into up to eight display areas using the DISPLAY menu (section
8.1). Scale values (section 8.9) and waveform labels (section 8.10) can also be displayed.

•

If waveforms are loaded from the history memory or from a storage medium such as a
floppy disk, Zip disk, or PC card, the input waveform cannot be displayed. To compare
waveforms, use the snapshot function.

•

Channels that do not have input modules installed cannot be turned ON.

•

A waveform icon is displayed to the left of the title of the CH1 to CH16, DSP1 to DSP6,
LOGIC A/B, and EVENT setup menus. The icon color is set to the color of each waveform
(see section 17.4). The icon shape varies depending on the displayed setup menu as
follows:

CH1 to CH16 DSP1 to DSP6

LOGIC A/B

EVENT

Setup menu title

Waveform icon

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments