manualshive.com logo in svg

YOKOGAWA 701210, User Manual, Page: 273 / 747

Share
Download
YOKOGAWA 701210 User Manual Download Page 273

7-7

IM 701210-05E

Acquisition and Display

7

Notes on Averaging

• Averaging is effective only against repetitive waveforms.

• Correct averaging is not possible if the waveform has imperfect triggering (incomplete

synchronization), and the displayed waveform will be distorted.  When working with

this type of signal, set the trigger mode to Normal, so that the waveform display is

updated only when the trigger is activated (see section 6.1).

• Roll mode display is disabled during averaging.

• Averaging is not possible when the trigger mode is Single, Single (N), or Log.

• If you stop waveform acquisition by pressing the START/STOP key, the averaging

process also stops.  Averaging restarts from the beginning when acquisition resumes.

• If you are using simple averaging, the DL750/DL750P terminates acquisition

automatically when it completes the specified number of acquisitions (acquisition

count).

• Averaging is not possible when the dual capture function is used or when realtime

recording is in progress.

• When acquiring waveforms in averaging mode, the data that is retained in the history

memory is 1 record.

7.3 Setting the Acquisition Mode

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments