YOKOGAWA 701210 User Manual Download Page 309

Page: 309 / 747

8-13

IM 701210-05E

Display

Setting the Display Range

11.

Press the

Start Point/End Point

soft key to set the jog shuttle control to Start

Point.

12.

Turn the

jog shuttle

to set the start point of the X-Y waveform display.

13.

Likewise, press the

Start Point/End Point

soft key to set the jog shuttle control

to End Point and set the end point of the X-Y waveform display.

Explanation

Selecting the X Axis Mode

Single: The X axis is set to a common trace, and the Y axis displays all the waveforms

whose display are turned ON.

Quad:

The X axis trace and Y axis trace are set individually for XY1 to XY4.

Assigning X (Horizontal) and Y (Vertical) Axes (When X Axis Is Set to Quad)

The channels that are assigned to the X and Y axes depending on the X-axis mode are

as follows:

X Axis Mode X-Y Waveform

X Axis

Y Axis

Single

CH1 to CH16, DSP1 to DSP6

All channels that are turned

Math1 to Math8

Quad

XY1

CH1 to CH8, DSP1 to DSP3

Math1 to Math4

XY2

CH1 to CH8, DSP1to DSP3

CH9 to CH16, DSP4 to DSP6

Math1 to Math4

Math5 to Math8

XY3

CH9 to CH16, DSP4 to DSP6

CH1 to CH8, DSP1 to DSP3

Math5 to Math8

Math1 to Math4

XY4

CH9 to CH16, DSP4 to DSP6

Math1 to Math4

Math5 to Math8

Number of X-Y Waveforms That Can Be Displayed

The number of X-Y waveforms that can be displayed is 16 for Single and 4 for Quad.

The display of each X-Y waveform is turned ON/OFF by turning the Y axis trace display

ON/OFF.

Selecting the Display Mode

You can select from the following three display modes.

T-Y&X-Y: The top window displays T-Y (normal) waveforms. The bottom window

displays X-Y waveforms.

X-Y:

Displays only X-Y waveforms.

T-Y:

Displays only T-Y waveforms.

8.6 Displaying X-Y Waveforms

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 701210

Reviews:

YOKOGAWA 701210, User Manual, Page: 309 / 747

Search results

Summary of Contents for 701210

Reviews: