YOKOGAWA 701210 User Manual Download Page 244

Page: 244 / 747

6-26

IM 701210-05E

Setting the Trigger Level

The trigger level setting applies to both simple and enhanced triggers.

For details, see “Setting the Trigger Level” in section 6.5.

Setting the Trigger Hysteresis

Sets a width to the trigger level so that triggers are not activated by small changes in the

trigger signal. Select the trigger hysteresis from

, and

For details, see “Setting the Trigger Hysteresis” in section 6.5.

Setting the Hold Off

For details, see section 6.4, “Setting the Hold Off Time.”

6.12 Setting the Edge on A Trigger (ENHANCED)

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 701210

Reviews:

YOKOGAWA 701210, User Manual, Page: 244 / 747

Search results

Summary of Contents for 701210

Reviews: