YOKOGAWA 701210 User Manual Download Page 324

Page: 324 / 747

9-5

IM 701210-05E

Recording in Recorder Mode (Realtime Recording) (Only on the DL750P)

Explanation

Selecting the Recorder Mode

When recording in recorder mode, first select the recorder mode. There are two

recorder modes, Chart Recorder and X-Y Recorder. If Chart Recorder mode is selected,

select the print style, Wave (record T-Y waveforms) or Numeric (record numeric values).

Functions That Cannot Be Used during Chart Recorder Mode or X-Y Recorder

Mode

The following functions (keys) cannot be used during recorder mode.

• History memory (HISTORY)

• GO/NO-GO determination (GO/NO-GO)

• Dual capture

• Waveform computation (MATH)

Also, items that are set with the ACQ or X-Y key cannot be changed.

Search & zoom (SHIFT+ZOOM (SEARCH)) cannot be used in X-Y Recorder mode.

DL750P Settings in Chart Recorder Mode

If Chart Recorder mode is selected, the DL750P settings change as follows:

Menu

Soft Key

Setting

ACQ

Record Length

Fixed to 2.5 MW

Mode

Envelope

Time Base

Int

RealTime Out

OFF

TIME/DIV

Linked to the chart speed

X-Y

Mode

T-Y Only

GO/NO-GO

Mode

OFF

MATH

Mode

OFF

DUAL CAPTURE

Mode

OFF

MEASURE

Mode

Statistics and History Statistics set to OFF

DISPLAY

Accumulate

OFF

*1 The acquisition mode can be changed from Envelope to Normal using MISC menu > Others

soft key. For details, see section 9.3.

*2 For the procedure of setting the chart speed, see section 9.3.

If the recorder mode is switched from OFF to Chart Recorder mode back to OFF, the

ACQ menu items and TIME/DIV setting return to the settings that existed before

switching to Chart Recorder mode.

DL750P Settings during X-Y Recorder Mode

If X-Y Recorder mode is selected, the DL750P settings change as follows:

Menu

Soft Key

Setting

ACQ

Record Length

Fixed to 1 MW

(TRIGGER)MODE

Auto

If the recorder mode is switched from OFF to X-Y Recorder mode back to OFF, the ACQ

menu items and (TRIGGER) MODE setting return to the settings that existed before

switching to X-Y Recorder mode.

9.2 Selecting the Recorder Mode

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 701210

Reviews:

YOKOGAWA 701210, User Manual, Page: 324 / 747

Search results

Summary of Contents for 701210

Reviews: