7-4
IM 701210-05E
Notes When Setting the Record Length
• Increasing the record length automatically limits the number of channels that can be
used. The display of the channels which can no longer be used because the record
length is increased can not be turned ON/OFF. The number of channels that can be
used is displayed on the soft key menu of Record Length of the ACQ menu (right of
the record length display).
• The maximum record length when acquisition mode is average is 1 MW on the
standard model, 2.5 MW on the M1 option model, 5 MW on the M2 option model, and
10 MW on the M3 option model. (For details, see appendix 1.)
• The maximum record length when using the dual capture function is 5 MW on the
standard model, 10 MW on the M1 option model, 50 MW on the M2 option model, and
100 MW on the M3 option model. (For details, see appendix 1.)
• The maximum record length when performing realtime recording is 1 GW (1 CH).
• When the trigger mode is Auto, Auto Level, Normal, or Single (N) and the display is
not in roll mode, you cannot select a record length that is greater than or equal to 2.5
MW on the standard model, 10 MW on the M1 option model, 25 MW on the M2 option
model, and 50 MW on the M3 option model.
7.2 Setting the Record Length