manualshive.com logo in svg

YOKOGAWA 701210, User Manual, Page: 149 / 747

Share
Download
YOKOGAWA 701210 User Manual Download Page 149

4-11

IM 701210-05E

Common Operations

4

USB Mouse Operation

• Operations Similar to the Front Panel Keys on the DL750/DL750P (Top Menu)

Displaying the Top Menu

Right-click on the screen.  The front panel keys on the DL750/DL750P are displayed

as the top menu.

Selecting Items on the Top Menu

Point to the item you wish to select and left-click the item.  The setup menu

corresponding to the selected item is displayed on the right side of the screen.  The

top menu is cleared from the screen.

Pointing to an item with a sub menu (items with a > mark displayed to the right)

displays the sub menu.  As with the top menu, point to the item you wish to select and

left-click the item.

Sub menu:
Items that have lower layers 
are displayed as sub menus.

Top menu:
Right-click to display the top menu.

Pointer

The setup menu 
appears.

Note

•

The following keys do not appear on the top menu.
ESC, RESET, SELECT, HELP, and arrow keys

•

The top menu also displays characters that are indicated in purple on the front panel.

•

The TRIGGER sub menu contains the following TRIGGER group keys.
MODE, SIMPLE/ENHANCED, POSITION, ACTION, and DELAY

•

There is no WIDE SCREEN key on the front panel.

•

To display the PRINT menu or the IMAGE-SAVE menu, select PRINT-MENU or IMAGE-
MENU.  To execute the PRINT or IMAGE SAVE operation, select PRINT or IMAGE
SAVE.

4.3  USB Keyboard/USB Mouse

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments