YOKOGAWA 701210 User Manual Download Page 27

Page: 27 / 747

Part 1:xvi

IM 701210-05E

Displaying Waveforms and Information

• Setting Waveform Display Conditions Sections 8.1 to 8.4 and 8.8
• Zooming on the Waveform

Section 8.5

• X-Y Waveform Display

Section 8.6

• Snapshot and Clear Trace

Section 8.7

• Setting Information Display Conditions Sections 8.9 to 8.13

Waveform Acquisition

• Record length

Section 7.2

• Acquisition mode

Sections 7.3 and 7.4

• Starting/Stopping waveform

Section 7.1

acquisition

Recording in Recorder Mode (DL750P Only)

• Loading the Roll Paper

Section 9.1

• Selecting the Recorder Mode

Section 9.2

• Recording T-Y Waveforms

Sections 9.3 to 9.5

• Recording Numeric Values

Section 9.6

• Recording X-Y Waveforms

Section 9.7

• Reprinting on the Built-in Printer

Section 9.8

• Creating a PDF File of the Reprint

Section 9.9

Image

Trigger

• Trigger Type* (Simple/Enhanced)

Sections 6.5 to 6.17

• Trigger Source, Trigger Slope,
Trigger Level, Etc

Sections 6.5 to 6.17

• Trigger Mode

Sections 6.1 and 7.5

• Trigger Position

Section 6.2

• Trigger Delay

Section 6.3

From the previous page

* Simple trigger
• Input signal trigger

Sections 6.5

and 6.9

• External trigger

Section 6.6

• Line trigger

Section 6.7

• Time trigger

Section 6.8

Enhanced trigger
• A

→

B(N) trigger

Section 6.10

• A Delay B trigger

Section 6.11

• Edge on A trigger

Section 6.12

• OR trigger

Section 6.13

• B > Time, B < Time, and
B Time Out trigger

Section 6.14

• Periodic trigger

Section 6.15

• Window trigger

Section 6.16

• Wave window trigger

Section 6.17

• Dual capture

Section 7.6

• Realtime recording to the
internal hard disk (optional)

Section 7.7

• Voice memo

Sections 3.14

and 7.9

• Acquisition memory backup Section 7.10

The functions below that are not covered in the flow of operations in this section are not explained in this manual. For their

descriptions, see the User’s Manual Part 2 (IM701210-06E).

• Computation, analysis, and searching of waveforms

• Printing of screen image data

• Saving and loading of data

• External trigger I/O, external clock input, video signal output, etc.

• DSP channels (option)

• Ethernet communications (option)

Flow of Operation

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 701210

Reviews:

YOKOGAWA 701210, User Manual, Page: 27 / 747

Search results

Summary of Contents for 701210

Reviews: