manualshive.com logo in svg

YOKOGAWA 701210, User Manual, Page: 92 / 747

Share
Download
YOKOGAWA 701210 User Manual Download Page 92

2-54

IM 701210-05E

2.7 Waveform Analysis/Search

Search and Zoom Function <Section 11.4>

Edge Search

Searches the position where the signal went over (rising) or below (falling) the specified

level the specified number of times from the search start position.  The waveform

expanded around the found position can be displayed in the zoom window.  The search

target is CH1 to CH16, DSP1 to DSP6, LOGIC A, and LOGIC B.

Specified level

Displays the detected section expanded
 in the zoom display frame

Search start point

Detection position

Search condition: Set the edge to rising and count to 2

Hysteresis

Auto Scroll

The zoom position automatically moves in the specified direction.  You can scroll through

the zoomed waveform and stop the scrolling at the desired position.

Voice Search

Searches the start point of the voice memo that has been recorded using the voice

memo function (see section 7.9).  Playing the voice memo that has been found is also

possible.

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments