manualshive.com logo in svg

YOKOGAWA 701210, User Manual, Page: 657 / 747

Share
Download
YOKOGAWA 701210 User Manual Download Page 657

19-28

IM 701210-06E

19.12 Module Specifications

WARNING

• Do not apply input voltage exceeding the maximum input voltage or allowable

common mode input voltage.

• To prevent the possibility of electric shock, be sure to furnish protective earth

grounding of the DL750/DL750P.

• To prevent the possibility of electric shock, be sure to fasten the module screws.

Otherwise, the electrical and mechanical protection functions will not be

activated.

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments