manualshive.com logo in svg

YOKOGAWA 701210, User Manual, Page: 319 / 747

Share
Download
YOKOGAWA 701210 User Manual Download Page 319

8-23

IM 701210-05E

Display

8

8.13 Displaying Channel Information/Displaying Waveforms on a Full Screen (Expanding the Waveform Area)

Note

•

Each time you press the ESC key, the display switches cyclically as follows: channel
information display 

→

 numeric monitor display 

→

 full screen display of waveforms full 

→

channel information display.

•

When the DL750/DL750P receives communication commands, the screen switches to
channel information display.

Explanation

Displaying the Channel Information

Pressing the ESC key once when the setup menu is displayed shows the channel

information.  The parameters displayed in the channel information are as follows.

However, not all parameters may be displayed when the number of display channels

increases.

• When measuring voltage:

V/div setting, input coupling, probe attenuation

(type), and bandwidth limit.

• When measuring temperature:

Temperature/div setting, thermocouple type, and

bandwidth limit.

• When measuring strain:

µ

STR/div (or [mV/V]/div) setting, measurement

range, and bandwidth limit.

• When measuring acceleration*:

Acceleration/div setting, gain, input coupling, and

bias setting.

• When measuring the frequency*: Value/div setting, measurement mode setting, and

preset setting.

• For DSP channels:

Value/div setting and computing equation.

*

Some items may not be displayed depending on the amount of information present.

Displaying the Numeric Monitor

Pressing ESC key once when the channel information is displayed clears the channel

information and shows the numeric monitor of the channels (CH1 to CH16, LogicA,

LogicB, DSP1 to DSP6 (option)) whose display is turned ON is displayed.

The display update interval of numeric monitor is 1 s.

Note

Notation of the Numeric Monitor of Logic Waveforms

The numeric monitor of logic waveforms (Logic A or Logic B) is displayed in binary or
hexadecimal notation.
Select the notation by carrying out the following procedure.

Press the CURSOR key > Type soft key > Vertical soft key, press the Logic Setup soft key
that appears when Trace is set to All, LogicA, LogicB, or LogicA & LogicB, and set Format to
Binary or Hexa.  For details, see step 1 to 7 on page 11-18 and “Display Format of Logic
Waveforms” on page 11-28.

• Binary

• Hexadecimal

Expanding the Waveform Display Area

Pressing the ESC key once when the channel information is displayed clears the channel

information and expands the waveform display area horizontally to cover the entire screen.

The waveform display area is expanded at power up.

Displaying the Parameter That Was Controlled by the Jog Shuttle Immediately

Before Pressing the ESC Key

The parameter that was controlled by the jog shuttle immediately before can be

displayed by pressing the SELECT key when the channel information is displayed or

when the waveform display area is expanded.  The setting of this parameter can be

changed by operating the jog shuttle in the usual manner.  To clear the display of the

parameter, press the ESC key.

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments