YOKOGAWA 701210 User Manual Download Page 652

Page: 652 / 747

19-23

IM 701210-06E

Specifications

19.12 Module Specifications

WARNING

• Do not apply input voltage exceeding the maximum input voltage, withstand

voltage, or allowable surge voltage.

• To prevent the possibility of electric shock, be sure to furnish protective earth

grounding of the DL750/DL750P.

• To prevent the possibility of electric shock, be sure to fasten the module screws.

• The module screws must be fastened for the module to function as a non-

isolation module. In addition, all electrical and mechanical protection functions

are activated only when the screws are fastened.

• The maximum input voltage of the module is valid only when all the screws are

fastened, and the protection path of the metal BNC is secured.

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 701210

Reviews:

YOKOGAWA 701210, User Manual, Page: 652 / 747

Search results

Summary of Contents for 701210

Reviews: