YOKOGAWA 701210 User Manual Download Page 183

Page: 183 / 747

5-23

IM 701210-05E

Horizontal and Vertical Axes

5.13 Displaying the All Channel Setup Menu

Copying to the Same Type of Modules

Press the

Copy to Same Module

soft key. The Copy From Ch screen appears.

Turn the

jog shuttle

to select Copy From Ch and press

SELECT

Use the

jog shuttle and SELECT

to select the copy source channel.

Turn the

jog shuttle

to select Exec and press

SELECT

. All of the settings are

copied to all the channels of the same type of modules as the copy source.

Note

Waveform colors and labels are not copied.

Turning ON/OFF the All the Channels

Use the

jog shuttle

or arrow keys to move to the Disp box for All and press

SELECT

. You can turn ON/OFF all the channels simultaneously.

Turn ON/OFF all the DSP channels(DSP1 to DSP6) simultaneously.

Turn ON/OFF all the channels(CH1 to CH16) simultaneously.

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 701210

Reviews:

YOKOGAWA 701210, User Manual, Page: 183 / 747

Search results

Summary of Contents for 701210

Reviews: