YOKOGAWA 701210 User Manual Download Page 134

Page: 134 / 747

3-31

IM 701210-05E

Making Preparations for Measurements

• When using the charge converter

Connect the charge output type acceleration sensor to a charge converter using a

highly isolated low-noise cable. By driving the charge converter using a constant

current from the DL750/DL750P, voltage signals similar to those of the built-in

amplifier type acceleration sensor can be obtained. The DL750/DL750P measures

the signals in the acceleration measurement mode and supplies bias current to the

charge converter. Set the input sensitivity of the DL750/DL750P according to the

charge converter gain and the sensitivity of the charge output type acceleration

sensor.

The DL750/DL750P only supports charge converters that are driven by constant

current with driving current of 4 mA and driving voltage of 22 V.

Charge output type
acceleration sensor

Normal

coaxial cable

Highly isolated
low-noise cable

Charge

converter

701275 (ACCL/VOLT)

(Acceleration measurement)

DL750/DL750P

Note

The unit of measurement of acceleration on the DL750/DL750P is m/s

. The sensitivity is

sometimes expressed in units of mV/G depending on the acceleration sensor. In such case,
convert the unit.(1 G = 9.81 m/s

)

Precautions

• Do not apply shock outside the specifications (see the manual for the acceleration

sensor) to the acceleration sensors. Doing so can damage the sensors.

• Do not impose drastic temperature changes on the acceleration sensors.

Temperature changes may affect the output value of the acceleration sensors.

• By default, the bias current on the acceleration sensors is turned OFF. Be sure to

turn it ON before using the acceleration sensors. Bias current is valid only when

measuring acceleration. When measuring other parameters, it is automatically turned

OFF. The ON/OFF setting of the bias current is retained even when you turn OFF the

DL750/DL750P.

3.12 Connecting Acceleration Sensors

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 701210

Reviews:

YOKOGAWA 701210, User Manual, Page: 134 / 747

Search results

Summary of Contents for 701210

Reviews: