9-9
IM 701210-05E
Recording in Recorder Mode (Realtime Recording) (Only on the DL750P)
9
Setting Details
Setting the Print Interval of Scale Values
10. Use the
jog shuttle
and
SELECT
to set Scale to OFF, 200mm, 400mm, or
800mm.
Setting the Print Interval of Channel Labels
11. Use the
jog shuttle
and
SELECT
to set CH Label to OFF, 200mm, 400mm, or
800mm.
Setting the Print Interval of Time
12. Use the
jog shuttle
and
SELECT
to set Time to OFF, 200mm, 400mm, or 800mm.
Setting the Gauge Print
13. Use the
jog shuttle
and
SELECT
to set Gauge to OFF, ON, or Fine.
Setting the Annotation
14. Use the
jog shuttle
and
SELECT
to set the print interval of annotations in the
right column of Annotation to OFF, 200mm, 400mm, or 800mm.
15. Use the
jog shuttle
and
SELECT
to set the type of annotation to be printed in
the right column of Type to CH Information, CH Message, or CH Data.
If CH Message is selected, proceed to step 16.
If CH Information or CH Data is selected, proceed to step 17.
16. Use the
jog shuttle
and
SELECT
to select Setup. Then, enter the message
you wish to print for the channel using up to 80 characters according to the
procedure in section 4.2.
Setting a Comment
17. Use the
jog shuttle
and
SELECT
to select Comment. Then, enter the comment
text you wish to print using up to 20 characters according to the procedure in
section 4.2.
Note
The comment setting is linked with the PRINT menu > Comment setting.
When Annotation Type is set to CH Message
Explanation
Display Format
Select the number of divisions of the recording area when recording to the built-in printer.
Single: 1 division
Triad: 3 divisions
Octal:
8 divisions
Dual:
2 divisions
Quad: 4 divisions
Hexadecimal: 16 divisions
The display (recording) format setting is linked with the DISPLAY menu > Format setting.
9.4 Setting the Recording Format of T-Y Waveform Recording