YOKOGAWA 701210 User Manual Download Page 199

Page: 199 / 747

5-39

IM 701210-05E

Horizontal and Vertical Axes

Setting the Bandwidth Limit and Waveform Label

For the setup procedure of the bandwidth limit, see section 5.7. For the setup procedure

of the waveform label, see section 8.10.

Explanation

Setting the Gain

Set the ratio of the output signal with respect to the input signal in the range of

0.1 to

100.

The default value is

Setting the Sensitivity

Set the sensitivity of the acceleration sensor in the range of 0.10 mV/Unit to 2000.00 mV/

Unit.

Setting the Unit

Set the unit of the acceleration to be displayed on the screen using up to 4 characters.

The default setting is m/s

. Change the unit as necessary.

Up to 8 character strings assigned to the unit are stored. The stored strings can be

recalled using the soft key. In addition, the stored strings can be used on the

acceleration modules of other channels. This function is useful when you are assigning

the same unit to multiple channels. The stored strings are not cleared even when the

power is turned OFF.

Setting the Bias Current Supply to the Acceleration Sensor

When Bias is turned ON, a 4-mA bias current is supplied to the acceleration sensor. Do

not connect the acceleration sensor with Bias turned ON.

Setting the Bandwidth Limit

See section 5.7, “Setting the Bandwidth Limit.”

5.18 Setting the Acceleration Measurement

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 701210

Reviews:

YOKOGAWA 701210, User Manual, Page: 199 / 747

Search results

Summary of Contents for 701210

Reviews: