manualshive.com logo in svg

YOKOGAWA 701210, User Manual, Page: 20 / 747

Share
Download
YOKOGAWA 701210 User Manual Download Page 20

Part 1:ix

IM 701210-05E

Safety Precautions

This instrument is an IEC safety class I instrument (provided with a terminal for

protective earth grounding).

The general safety precautions described herein must be observed during all phases of

operation.  If the instrument is used in a manner not specified in this manual, the

protection provided by the instrument may be impaired.  Yokogawa Electric Corporation

assumes no liability for the customer’s failure to comply with these requirements.

The followingsymbols are used on this instrument.

Warning: handle with care.  Refer to the user’s manual or service manual.  This

symbol appears on dangerous locations on the instrument which require special

instructions for proper handling or use.  The same symbol appears in the

corresponding place in the manual to identify those instructions.

Protective grounding terminal

Functional ground terminal (do not use this terminal as a protective ground

terminal.)

Alternating current

ON (power)

OFF (power)

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments