YOKOGAWA 701210 User Manual Download Page 173

Page: 173 / 747

5-13

IM 701210-05E

Horizontal and Vertical Axes

Explanation

The displayed waveform can be enlarged/reduced vertically. This is useful when you

wish to change the vertical axis setting after displaying waveforms. This function can be

used when the Variable setting is OFF.

Selecting the Trace to Zoom On

Select a single waveform from CH1 to CH16, LOGIC A, LOGIC B, DSP1 to DSP6

(optional), and EVENT.

However, zooming is not possible if the selected waveform is turned OFF.

Zoom Rate: V Zoom

The following zoom rates are available.

0.1,

0.111,

0.125,

0.143,

0.167,

0.2,

0.25,

0.33,

0.4,

0.5,

0.556,

0.625,

0.667,

0.714,

0.8,

0.833,

1.11,

1.25,

1.33,

1.43,

1.67,

2.22,

2.5,

3.33,

6.67,

10,

12.5,

16.7,

20,

25,

40,

50, and

100

However, the range of zoom rates that can be specified varies for the following cases.

• On the 701260 (HV (with RMS))

When set to 50 V/div:

0.25 to

100

When set to 100 V/div:

0.5 to

100

When set to 200 V/div:

1 to

100

• When measuring acceleration on the 701275 (ACCL/VOLT)

0.5 to

• On the 701280 (FREQ)

0.33 to

100

Zoom Position

The waveform is zoomed around the vertical position.

1 div=0.5 V

If V ZOOM is set to

1 div=1 V

Vertical
position
mark

GND mark

5.8 Zooming Vertically by Setting the Zoom Rate

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 701210

Reviews:

YOKOGAWA 701210, User Manual, Page: 173 / 747

Search results

Summary of Contents for 701210

Reviews: