YOKOGAWA 701210 User Manual Download Page 140

Page: 140 / 747

4-2

IM 701210-05E

4.1 Operations and Functions of Keys and the Jog Shuttle

Operations on the Setup Dialog Box

Show the setup dialog box using basic key operations or other similar means.

Turn the

jog shuttle

to move the cursor to the desired item.

Press

SELECT

. The behavior that results when you press

SELECT

varies

depending on the item as described below. This manual refers to the above

operation as “

jog s SELECT

.”

E: Press SELECT to display the selection menu.

Turn the jog shuttle to move the cursor to the item you wish to set.

Press SELECT to confirm the selection.

F: Press SELECT to switch the selection items.

G: Press SELECT to display the value entry box. Turn the jog shuttle to set the value.

Press the arrow keys to move along the digits.

You can directly enter the value using the NUM KEY or USB keyboard.

Setup dialog box

When Mode is selected

When Edge Count is selected

Turn the jog shuttle to
move the cursor to the
item you wish to set.

Value entry box

Selection menu

Clearing the Menu and Setup Dialog Box Displays

Press

ESC

. The setup menu or setup box shown on top is cleared from the

screen.

Note

•

In the operating procedures in this manual, the step for clearing the setup menu and setup
box is not indicated.

•

When the setup menu is cleared, the main information on the displayed channels is
shown. For details, see section 8.13.

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 701210

Reviews:

YOKOGAWA 701210, User Manual, Page: 140 / 747

Search results

Summary of Contents for 701210

Reviews: