manualshive.com logo in svg

YOKOGAWA 701210, User Manual, Page: 509 / 747

Share
Download
YOKOGAWA 701210 User Manual Download Page 509

13-55

IM 701210-06E

Saving and Loading Data

13

Explanation

Selecting the Data Type

Real Time

• Data saved using realtime recording.

• The data that is realtime recorded can be loaded to display the waveform and

compute numeric data.

• The extension is .WDF.

Data Size

The maximum data size is as follows: The unit of the record length is word.

(Record length 

×

 2 

×

 (the number of ch 1) 

×

 (1.05 to 1.15)) bytes

[RealTime] Drive

• The WDF data that is created by the realtime recording is saved to the [RealTime]

drive.

• The [RealTime] drive appears only when Data Type is set to Real Time.  If you wish to

manage the files on the [RealTime] drive, set Data Type to Real Time.

• You can set the size of the RealTime drive in the range of 30% to 70% of the entire

capacity of the internal hard disk.  This setting is entered when the internal hard disk

is formatted.  For details, see section 13.5.

13.14  Loading/Converting Realtime Recorded Waveforms

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments