manualshive.com logo in svg

YOKOGAWA 701210, User Manual, Page: 104 / 747

Share
Download
YOKOGAWA 701210 User Manual Download Page 104

3-1

IM 701210-05E

  Making Preparations for Measurements

3

Chapter 3

Making Preparations for Measurements

3.1

Handling Precautions

Safety Precautions

If you are using this instrument for the first time, make sure to thoroughly read the

“Safety Precautions” given on page Part 1:viii to Part 1:x.

Do not Remove the Case

Do not remove the case from the instrument.  Some parts of the instrument use high

voltages, which are extremely dangerous.  For internal inspection or adjustment, contact

your nearest YOKOGAWA dealer.

In Case of Irregularity

If you notice smoke or unusual odors coming from the instrument, immediately turn OFF

the power and unplug the power cord.  If such an irregularity occurs, contact your dealer

or the nearest YOKOGAWA representative.

Power Cord

Nothing should be placed on the power cord; also, it should be kept away from any heat

sources.  When unplugging the power cord from the outlet, never pull by the cord itself.

Always hold and pull by the plug.  If the power cord is damaged, contact your dealer for

replacement.  Refer to page Part 1:v for the part number when placing an order.

General Handling Precautions

Never Place Anything on Top of the Instrument

Never place other instruments or objects containing water on top of the instrument,

otherwise a breakdown may occur.

Do not Cause Shock to the Input Section

Shock to the input connectors or probes may turn into electrical noise and enter the

instrument via the signal lines.

Do not Damage the LCD

Since the LCD screen is very vulnerable and can be easily scratched, do not allow any

sharp objects near it.  Also it should not be exposed to vibrations and shocks.

When not using the instrument for a long period, unplug the power cord from the AC

outlet.

When the Instrument Is not going to Be Used for a Long Period

Unplug the power cord from the AC outlet.

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments