manualshive.com logo in svg

YOKOGAWA 701210, User Manual, Page: 285 / 747

Share
Download
YOKOGAWA 701210 User Manual Download Page 285

7-19

IM 701210-05E

Acquisition and Display

7

CAUTION

• If the power is cut off when realtime recording is in progress, a disk area that

cannot be freed may result in the realtime recording area or the internal hard

disk may be damaged.

If a disk area that cannot be freed results, the disk performance in the realtime

area may deteriorate.  Consequently, realtime recording may not operate

properly.  In this case, back up the required data on the internal hard disk and

format the internal hard disk.

• Do not expose the DL750/DL750P to shock when realtime recording is in

progress.  The internal hard disk may get damaged or the realtime recording

may not operate properly.

• An icon 

 in the upper left part of the screen blinks when realtime recording is

in progress. Do not remove or insert the USB storage device* connected to the

USB connector (for peripherals) while the icon is blinking. The DL750/DL750P

may stop functioning properly, or data may become corrupted during realtime

recording.

*

A memory device connected to a USB connector such as an MO disk drive, hard disk, or
flash memory.

• The Real Time drive is a working area on the DL750/DL750P internal hard disk

for realtime recording.

Never delete files from the drive or add files to the drive from an external PC

such as by using the FTP server function.

If you do, the realtime recording may not operate properly.

Note

For the procedure in saving the data, see section 13.14.

7.7 Realtime Recording to the Internal Hard Disk (Optional)

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments