Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 94 / 204

Table 6-5: Tasks available on the Quantum system (continued)
Task Name Adherent Cells
Suspension
Cells
Purpose Page
Load and Attach Tasks
Load Cells With
Circulation
Yes Yes
Allows you to load the cells from the cell inlet
bag into the IC circulation loop until the bag is
empty, and uses IC circulation to distribute the
cells.
page 10-2
Load Cells Without
Circulation
Yes Yes
Allows you to load the cells from the cell inlet
bag into the bioreactor via the IC circulation
loop until the bag is empty.
page 10-5
Attach Cells
Yes No
Allows adherent cells to attach to the bioreactor
membrane while allowing flow in the
EC circulation loop.
page 10-7
Load Cells With
Uniform Suspension
Yes Yes
Allows you to load the cells into the bioreactor
from the cell inlet bag until the bag is empty and
to use IC circulation to create uniform cell
suspension.
page 10-9
Feed and Add Tasks
Feed Cells With
Ultrafiltration
Yes Yes
Allows you to continuously add fluid at a low
flow rate to the IC circulation loop and/or the
EC circulation loop. This task uses ultrafiltration
to remove excess IC fluid.
page 11-2
Feed Cells
Yes No
Allows you to continuously add fluid at a low
flow rate to the IC circulation loop and/or the
EC circulation loop. There are several outlet
settings that you can use to remove the fluid
that is added to the system during this task.
page 11-4
Add Bolus
Yes Yes
Allows you to quickly add a selected volume of
reagent into the IC circulation loop; you can also
add a bolus into the EC circulation loop at the
same time.
page 11-6
Add Bag Contents
Yes Yes
Allows you to load a fluid, such as a reagent,
into the IC circulation loop until the bag that
contains the fluid is empty.
page 11-8
Add Fluid
Continuously
Yes No
Allows you to continuously add fluid at a low
flow rate to the IC circulation loop and/or the
EC circulation loop. There are several outlet
settings that you can use to remove the fluid
that is added to the system during this task.
page 11-10
Add Fluid
Continuously With
Ultrafiltration
Yes Yes
Allows you to continuously add fluid at a low
flow rate to the IC circulation loop and/or the
EC circulation loop. This task uses ultrafiltration
to remove excess IC fluid.
page 11-12
Table of Tasks
Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1 6-21