Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 91 / 204

EC Volume
The EC Volume stop condition allows you to specify the total EC inlet volume that must be added
before the system ends the step. The following example shows how this operator's manual denotes the
EC Volume stop condition:
EC Volume (50 mL)
Selecting the EC Volume Stop Condition
The following instructions explain how to select EC Volume as the stop condition for a task or a step of a
task. For information about using the data entry pad, see “Using the Data Entry Pad” on page 3-21.
From the Setup screen:
1. Touch
Stop Condition
.
The Setup: Stop Condition window opens.
2.
Touch
EC Volume
.
A data entry field appears, and
EC Volume
changes to black.
3. Touch the data entry field.
A data entry pad appears.
4. Use the data entry pad to enter the desired volume.
5.
Touch
Enter
on the data entry pad.
The data entry pad closes, and the data entry field displays the volume you entered.
6. Touch
Confirm
.
The Setup: Stop Condition window closes.
Empty Bag
The Empty Bag stop condition allows you to empty a bag into the system completely. The following
example shows how this operator's manual denotes the Empty Bag stop condition:
Empty Bag
Selecting the Empty Bag Stop Condition
The following instructions explain how to select Empty Bag as the stop condition for a task or a step of a
task.
From the Setup screen:
1. Touch
Stop Condition
.
The Setup: Stop Condition window opens.
2. Touch
Empty Bag
.
Empty Bag
changes to black.
3. Touch
Confirm
.
The Setup: Stop Condition window closes.
Inlet Volume
The Inlet Volume stop condition is available only on High Density Washout. The Inlet Volume stop
condition indicates the total inlet volume (based on both the IC inlet and the EC inlet volumes) that
must be added before the system ends the step. When you select High Density Washout, the system
Performing Tasks
6-18 Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1