Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 64 / 204

Clearing An Alarm
If an alarm occurs, perform the following steps:
1. Read the alarm identification number and name, the Alarm Description, and the System Response.
2. Read all of the possible causes and the operator actions for the alarm.
3. Perform the operator actions to resolve the condition causing the alarm.
4. Once you have resolved the condition causing the alarm, touch
Continue
.
About Remote Alarm Notification
Remote alarm notification allows you to connect your Quantum system to an existing alarm notification
system at your facility so that you can receive notification of alarms that occur on the Quantum system
when an operator is not present at the device.
If remote alarm notification is enabled and an alarm occurs on the Quantum system, it sends a copy of
the alarm message to a server that is set up to receive and process the messages. The alarm message is sent
using port control protocol (PCP) and is saved as an Extensible Markup Language (XML) file. For more
information about remote alarm notification and how to configure it, see the Quantum Cell Expansion
System Administrator’s Guide.
About Remote Alarm Notification
Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1 4-5