Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 132 / 204

Table 10-2: Step 1 Settings for Load Cells With Circulation (continued)
Setting Factory Default Setting Options
EC Inlet Rate 0 mL/min N/A
EC Circulation Rate 30 mL/min 10 to 300 mL/min
Outlet EC Outlet N/A
Rocker In Motion (−90°, 180°, 1 sec) In Motion (−180° to 270°, 0 to 3600 sec), Stationary
(−180° to 270°)
Stop Condition Empty Bag N/A
2. Confirm the settings for step 2 shown in Table 10-3.
Table 10-3: Step 2 Settings for Load Cells With Circulation
Setting Factory Default Setting Options
IC Inlet IC Media Reagent, IC Media, Wash, EC Media
IC Inlet Rate 50 mL/min Same as step 1
IC Circulation Rate 139 mL/min Same as step 1
EC Inlet None N/A
EC Inlet Rate 0 mL/min N/A
EC Circulation Rate 30 mL/min Same as step 1
Outlet EC Outlet N/A
Rocker In Motion (−90°, 180°, 1 sec) Same as step 1
Stop Condition IC Volume (22 mL) IC Volume (1 to 100 mL)
3.
Confirm the settings for step 3 shown in Table 10-4.
Table 10-4: Step 3 Settings for Load Cells With Circulation
Setting Factory Default Setting Options
IC Inlet IC Media Reagent, IC Media, Wash, EC Media
IC Inlet Rate 50 mL/min Same as step 1
IC Circulation Rate −41 mL/min N/A
The system automatically calculates this rate based on the IC Inlet Rate
for this step.
Load Cells With Circulation
Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1 10-3