Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 173 / 204

About Reports
The Quantum system allows you to generate three types of reports: run reports, user reports, and
configuration reports. For information on configuring the following report settings, see the Quantum
Cell Expansion System Administrator’s Guide:
•
Configure the system to generate run reports.
• Set the system to send run reports automatically to a server.
• Set the frequency to record temperature and pressure on a run report.
• Set the current system configuration as the baseline for the configuration report.
• Configure the connection to an FTP server to receive reports.
Run Reports
A run report contains information about a single run on the system. A single run includes each task that
the system performed from the start of Load Cell Expansion Set through the completion of Unload Cell
Expansion Set. The system records the following information in each run report:
•
Each task the system performed, including tasks that were stopped prior to completion, and any
settings that the user modified during setup
• Temperature and pressure readings at a configured interval throughout the run
• All alarms that occurred during the run
• All sign
‑
in errors that occurred during the run, if the system is configured to record failed sign
‑
in
attempts
The Quantum system stores completed run reports.
You can configure the system to generate a new run report each time you start Load Cell Expansion Set.
You can also configure the system so it automatically sends the report to an FTP server. For more
information about configuring reports, see the Quantum Cell Expansion System Administrator’s
Guide. Figure 15-1 shows an example run report.
Reports
15-2 Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1