Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 99 / 204

9. Peel back the tray cover from the cell expansion set package.
10. Place the tubing organizer on the mounting plate:
•
Grasp the sides of the tubing organizer with both hands, lift the tubing organizer up to the
mounting plate, align the hole in the center of the tubing organizer with the rocker arm on the
mounting plate, and partially slide the tubing organizer onto the rocker arm.
• Rest the bioreactor with the attached rocker assembly on the spill tray of the Quantum device,
as shown in Figure 7-3.
• Take out the coils and the bags, and set them aside.
11. Press on the sides of the tubing organizer to snap it onto the mounting plate, and ensure that all five
external mounting clips lock over the edges of the tubing organizer. Figure 7-3 shows the tubing
organizer attached to the mounting plate.
Figure 7-3: Tubing organizer attached to the mounting plate
1 Rocker assembly
2 Bioreactor (with the rocker assembly attached) resting on the spill tray
Caution: When loading the cell expansion set, do not turn the internal mounting clips more than a quarter
turn, or you could pinch the tubing.
Set Management Tasks
7-4 Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1