Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 39 / 204

About the Touch Screen
Caution: Do not use a stylus with the Quantum system touch screen.
The touch screen contains buttons that you touch to enter data or to command the system to perform a
specific action. The touch screen also displays information about the condition of the system that you
can use to monitor and troubleshoot the system. The touch screen works with both gloved and
un
‑
gloved hands.
Home Screen
When you turn on the Quantum system, the home screen appears. Figure 3-1 shows the home screen
when the system is idle, and Figure 3-2 shows the home screen when the system is performing a task. The
home screen allows you to monitor a task because it displays what the system is doing during a task,
including the pump rates, pressures, temperature, and the fluid source selections. Table 3-1 describes the
sections of the home screen.
6
10
1
7
2
3
4
9
8
5
Figure 3-1: Home screen when the system is idle
Touch Screen
3-2 Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1