Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 42 / 204

Status Bar
The status bar, located at the bottom of the touch screen, displays the current status of the device, as well
as the buttons and icons that allow you to monitor basic functions. The status bar appears continuously
on the touch screen. Figure 3-3 shows the status bar, and Table 3-2 describes the sections, buttons, and
icons that appear on it.
4 5 6 2 1 3
Figure 3-3: Status bar
Table 3-2: Status bar sections, buttons, and icons
Name Function
1
Date and time display Displays the current date and the current time. For
information about how to configure the format of the
date and time display, see the Quantum Cell
Expansion System Administrator’s Guide.
2
Status line Indicates the current status of the system. When the
system performs a task, this section displays the task
name, which step of the task the system is currently
performing, and the total number of steps in the task.
When the system is not performing a task, this
section displays Idle.
3
User ID display Displays the user ID of the user who is currently
signed in to the system. This appears on the home
screen only if user authentication is enabled.
4
Rocker icon
• When the system is idle and the bioreactor is in
the home position, this icon is gray and displays
0°.
• When the rocker is set to In Motion and the
bioreactor is moving, this icon is blue.
• When the rocker is set to Stationary and the
bioreactor is in a fixed position, this icon is gray
and displays a value (in degrees) that indicates
the fixed position of the bioreactor.
5
Door icon Turns blue when the incubator door is open.
Home Screen
Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1 3-5