Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 54 / 204

Setup Screen
The Setup screen allows you to manually enter task settings either for a single
‑
step task or for one step in
a multi
‑
step task. The buttons that are enabled on the Setup screen vary depending on the task you are
performing. Figure 3-9 shows the Setup screen for a single
‑
step task. Table 3-7 describes all the buttons
that can appear on the Setup screen.
8
1
3
4
7
6
2
5
10
9
Figure 3-9: Setup screen
Table 3-7: Setup screen buttons
Name Function
1
Outlet
When touched, allows you to designate the
pathway from the bioreactor to an outlet. This
selection controls the outlet valve positions.
2 EC Inlet When touched, allows you to select the fluid
source (line) for the EC inlet. This selection
controls the inlet valve positions.
Setup Screen
Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1 3-17