Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 65 / 204

Power Fail Recovery
If a power failure occurs during operation, the Quantum system restarts and undergoes a system
recovery. During recovery, the system is restored to the state it was in at the time the power failure
occurred.
•
If the system was idle when the power failure occurred, it restarts and displays the home screen in the
idle state.
• If the system was performing a task when the power failure occurred, it restarts and then restores the
task that was in progress. If the incubator door was open when the power failure occurred, the
system restores the task that was in progress, but it pauses the task so that no parts are moving on the
device during recovery. Once the system restores the task that was in progress, it produces an alarm
that provides the following information about the power failure:
–
The name of the task that was in progress at the time the power failure occurred
– The time at which the power failure occurred
– The time at which the system was restored
– The duration of the power failure
Troubleshooting
4-6 Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1