Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 116 / 204

Table 8-2: Step 1 Settings for Condition Media (continued)
Setting Factory Default Setting Options
Outlet EC Outlet N/A
Rocker Stationary (0°) Stationary (−180° to 270°)
Stop Condition Time (10 min) Time (6 to 15 min)
2. Confirm the settings for step 2 shown in Table 8-3.
Table 8-3: Step 2 Settings for Condition Media
Setting Factory Default Setting Options
IC Inlet None N/A
IC Inlet Rate 0 mL/min N/A
IC Circulation Rate 100 mL/min Same as step 1
EC Inlet EC Media Same as step 1
EC Inlet Rate 0.1 mL/min Same as step 1
EC Circulation Rate 30 mL/min 0 to 100 mL/min
Outlet EC Outlet N/A
Rocker Stationary (0°) Stationary (−180° to 270°)
Stop Condition Manual N/A
3.
Touch
Start
.
4. Check the status line to confirm that the task has started.
5.
Touch
Finish
when you are ready to complete the task.
6. Touch
Yes
.
The home screen appears, the system changes to an idle state, and the status line displays Idle.
Condition Media
Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1 8-7