Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 181 / 204

Recording Temperature and Pressure on a Run Report
The system allows you to record the temperature and pressure on a run report in two ways. You can
configure the system to record the temperature and pressure on a run report at a set interval throughout a
run. For more information, see the Quantum Cell Expansion System Administrator’s Guide. You can
also complete the following steps at any time during a run to record temperature and pressure on a run
report.
1. Touch
Utilities
.
The Utilities screen appears.
2. Touch
Reports
.
The Reports screen appears, as shown in Figure 15-3.
3. Under Run Reports, touch
Record
.
The circle next to the Record button flashes red as the system records the actual current temperature
and pressure.
Figure 15-3: Record button on the Reports screen
For an example of how a temperature and pressure recording appears on a run report, see
Figure 15-1 on page 15-3.
Reports
15-10 Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1