Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 76 / 204

Figure 6-1: Task Finished window
How Tasks Appear in this Operator’s Manual
In this operator’s manual, each task includes instructions for completing that task. Some tasks include a
table of settings for each step of the task, and each table includes the factory default and any additional
options for each setting. A task may also include a table that describes the solutions needed to perform
the task, such as the types of fluids to use, the line to which you should attach each type of fluid, and the
approximate volume of each fluid required to complete that task. This information is based on
performing a task using the factory default settings for that task.
The instructions for a task may also include one or more preconditions that you need to satisfy before
you begin that task. Most tasks also include a pathway, which is a shorthand reminder for how to select
that task. The following example shows the actual instructions for selecting Load Cells With Circulation
and the corresponding pathway:
1. Touch
Task
.
2. Touch
Load and Attach
.
3. Touch
Load Cells With Circulation
.
Load Cells With Circulation pathway:
Task
>
Load and Attach
>
Load Cells With Circulation
About Tasks
Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1 6-3