Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 24 / 204

Table 2-2: Components on the back of the device
Location Component Function
1 Rear Ethernet port Allows you to connect the Quantum system to an external device or a
local network for the purpose of transferring data.
2 External gas connector Connects the external gas supply to the system.
3 External pressure relief valve Expels excess gas pressure.
4 Gas flow control knob Allows service personnel to adjust the gas flow rate from the external
gas source into the system.
5 Primary power switch Protects the device from damage caused by an electrical overload or a
short circuit. Located on the bottom
‑
left corner on the back of the device
as you face the front of the device. The switch must be in the on position
to operate the device.
Incubator
Figure 2-3: Inside the incubator
Quantum System Components
Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1 2-5