Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 46 / 204

Touch Screen Views
The touch screen has two views: a diagram view and a tabular view. The system defaults to the diagram
view. You can switch from the diagram view to the tabular view by touching the select tabular view
button, shown in Figure 3-4. Likewise, you can switch from the tabular view to the diagram view, as
needed, by touching the select diagram view button, shown in Figure 3-5.
Diagram View
In the diagram view, the Quantum system is shown as a colored illustration with the intracapillary (IC)
side of the bioreactor in yellow and the extracapillary (EC) side of the bioreactor in blue. The illustration
also includes arrows that show the bi
‑
directional flow within the IC and EC circulation loops. The
Outlet selection is depicted in green when the IC outlet line and/or the EC outlet line are being used.
However, when Harvest is the Outlet selection, the color of Outlet changes to purple to emphasize that
selection.
Figure 3-4 shows an example of the home screen set to the diagram view when the system is performing a
task. When the system is idle, the illustration on the system window changes to gray, except for Outlet,
which changes to green and shows the selection EC Outlet; the line from Outlet to the EC circulation
loop is depicted in blue. Figure 3-1 shows an example of the home screen set to the diagram view when
the system is idle.
Touch Screen Views
Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1 3-9