Backing up system data in separate files
+
1.
Select the desired operating area.
2.
Press this horizontal softkey to open the system data window. Three
folders and one file are available in this window.
Note that the last three entries are visible with the manufacturer pass‐
word only.
3.
Select a desired folder and press this key to open it.
4.
Select the file that you desire to back up, and press this softkey. To
copy all files in the folder, press the following softkey before you press
this softkey:
5.
Select a data backup path by pressing one of the available softkeys:
Backs up the files in the folder for storing the user cycles on the control
system. This folder is visible with the manufacturer password.
Backs up the files onto an USB stick
Backs up the files to an external PC through the Ethernet interface.
For more information, see section ''External data backup through the
Ethernet interface (Page 557)'.
Backs up the files in the folder for storing the manufacturer files on
the control system. This folder is visible with the manufacturer pass‐
word.
Backs up the files in the folder for storing end user files on the control
system
6.
Press this softkey to paste the copied data into the selected directory.
Note
Do not remove the USB stick during the backup process if you select USB as the backup path.
Data backup
8.2 External data backup
Diagnostics Manual
556
Diagnostics Manual, 06/2015, 6FC5398-6DP10-0BA2
