Setting basic machine data
The control system provides easy-to-use data lists for beginner users. You can use the basic
data list for quick access of common data.
Setting basic NC data
In the basic NC data list, the general, axis, and channel MD are integrated in one screen.
Proceed through the following steps to set the basic NC data:
+
1.
Select the desired operating area.
2.
Press this softkey, and the window of basic NC data opens by default.
3.
Locate the machine data which you desire to set.
You can also search for an MD using the following softkeys:
Searches for the desired number or the name (or a part of the name)
of the machine data
Continues searching for the next match
4.
Enter the desired value in the blank and press this key to confirm.
5.
Press this softkey to activate the modified value(s) after you finish
setting the machine data.
Further softkey operations are available for setting the basic NC data:
Switches to the next axis
Switches to the previous axis
Resets the value of the selected MD to default
Undoes the modified values and recalls the lastly used values
Setting basic drive data
Several common drive parameters are provided in the basic drive data list. Proceed through
the following steps to set the basic drive data:
+
1.
Select the desired operating area.
2.
Enter the window of basic drive data through the following softkey
operations:
Operating in the system data management operating area
3.3 Setting both system machine data and setting data
Diagnostics Manual
Diagnostics Manual, 06/2015, 6FC5398-6DP10-0BA2
17
