Action list
The actions described in the NCK alarm texts ("Action %...") are explained in the following
Chapter:
See Chapter: Cancel criteria for alarms (Page 532)
Specification "%"
The specification "%" represents variables for an online parameter that is replaced on the
control with a corresponding value. Since the SINUMERIK 808D ADVANCED is a single-
channel control system, "Channel 1" is always output.
Safety
DANGER
Please check the situation in the plant on the basis of the description of the active alarm(s).
Eliminate the causes for the occurrence of the alarms and acknowledge in the manner
indicated. Failure to observe this warning will place your machine, workpiece, stored settings
and possibly even your own safety at risk.
2.2
Alarm number ranges
The following tables show an overview of all of the reserved number ranges for alarms/
messages.
Note
In the alarm lists of this manual, only those number ranges are represented, which are valid
for the specified product.
NCK alarms/messages
002 000 - 009 999
General alarms
010 000 - 019 999
Channel alarms
020 000 - 029 999
Axis/spindle alarms
030 000 - 099 999
Functional alarms
NCK alarms (Page 47)
Cycle alarms/messages
060 000 - 069 999
General cycle alarms
Cycle alarms (Page 363)
Introduction
2.2 Alarm number ranges
Diagnostics Manual
10
Diagnostics Manual, 06/2015, 6FC5398-6DP10-0BA2
