manualshive.com logo in svg

Siemens HiPath 3000 Series, Service Documentation

The Siemens HiPath 3000 Series offers exceptional telecommunication solutions for businesses of all sizes. Gain access to comprehensive Service Documentation and user manuals, available for download absolutely free from manualshive.com. Discover an array of features and functions, ensuring seamless communication for your organization.

Share
Download
background image

hp3hp5shTOC.fm

A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9

,

Service documentation

0-7

Nur für den internen Gebrauch

Contents

4.2.3.4  Removing the System Housing Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-92
4.2.3.5  Attaching the System to the Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-94
4.2.3.6  Grounding the System and the Main Distribution Frame . . . . . . . . . . . . . . .   4-95
4.2.3.7  Installing the Boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-98
4.2.3.8  Laying the Line Network and Connection Cables  . . . . . . . . . . . . . . . . . . . .   4-99
4.2.3.9  Attaching Ferrite   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-102
4.2.3.10  Configuration Notes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-105
4.2.3.11  Connecting Workpoint Clients  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-109
4.2.3.12  Making Trunk Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-109
4.2.3.13  Performing a Visual Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-109

4.2.4  Installing HiPath 3500 and HiPath 3300 (19-Inch Housing)  . . . . . . . . . . . . . . .   4-110

4.2.4.1  Installation Versions   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-110
4.2.4.2  Selecting the Installation Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-111

4.2.4.2.1  For U.S. only: Power plug  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-111

4.2.4.3  Unpacking the Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-112
4.2.4.4  Not for U.S.: Attaching a HiPath 3500 and HiPath 3300 to the Wall  . . . . .   4-113
4.2.4.5  Installing a HiPath 3500 or HiPath 3300 in a Cabinet  . . . . . . . . . . . . . . . .   4-114
4.2.4.6  Grounding the System  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-116
4.2.4.7  Installing the Boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-117
4.2.4.8  Connecting Cables and the Line Network  . . . . . . . . . . . . . . . . . . . . . . . . .   4-118
4.2.4.9  Configuration Notes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-120
4.2.4.10  Connecting Workpoint Clients  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-123
4.2.4.11  Making Trunk Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-123
4.2.4.12  Performing a Visual Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-123
4.2.4.13  Installing the EXMR on the CBRC  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-124

4.2.5  Replacing the Backplane  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-126

4.2.5.1  Replacing the Backplane for HiPath 3350/3550 (Wall Cabinet) . . . . . . . . .   4-126
4.2.5.2  Replacing the Backplane for HiPath 3300/3500 (19” Rack) . . . . . . . . . . . .   4-129

5  Starting Up HiPath 3000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-1
5.1  Starting Up HiPath 3800  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-2

5.1.1  Startup Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-2
5.1.2  Supplying the System with Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-2

5.1.2.1  Assigning Station Numbers  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-4

5.1.3  Carrying Out a System Reload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-6
5.1.4  Carrying Out the Country Initialization and Selecting the Password Type  . . . . . .   5-7
5.1.5  Not for U.S.: Entering the System Number   . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-9
5.1.6  Customer-Specific Programming  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-10
5.1.7  Performing a System Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-10

5.2  Starting Up HiPath 3550, HiPath 3350, HiPath 3500, HiPath 3300. . . . . . . . . . . . . .   5-11

5.2.1  Startup Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-11
5.2.2  Supplying the System With Power  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-12

5.2.2.1  Assigning Station Numbers  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-13

5.2.3  Carrying Out a System Reload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-15
5.2.4  Carrying Out the Country Initialization and Selecting the Password Type  . . . . .   5-15

Summary of Contents for HiPath 3000 Series























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for HiPath 3000 Series

Racal Instruments 1266 Manual preview
1266
Brand: Racal Instruments Pages: 64
WAREMA Wisotronic Operating Instructions Manual preview
Wisotronic
Brand: WAREMA Pages: 112
Reliance Foundry R-7651-EM Installation preview
R-7651-EM
Brand: Reliance Foundry Pages: 3
auna multimedia MC-30 DAB Manual preview
MC-30 DAB
Brand: auna multimedia Pages: 124
Aastra IntelliGate 2025 User Manual preview
IntelliGate 2025
Brand: Aastra Pages: 71
Magnavox MM444BT Owner'S Manual preview
MM444BT
Brand: Magnavox Pages: 23
ATEN VK1100 User Manual preview
VK1100
Brand: ATEN Pages: 176
Clarion VRX785BT Owner'S Manual & Installation Manual preview
VRX785BT
Brand: Clarion Pages: 83
Daewoo AXL-125 Service Manual preview
AXL-125
Brand: Daewoo Pages: 22
Fasel Elektronik FCU-EXT-APP-CONTROL Installation preview
FCU-EXT-APP-CONTROL
Brand: Fasel Elektronik Pages: 2
AT&T MERLIN LEGEND Release 2.0 Analog Multiline Telephone System Programming Manual preview
MERLIN LEGEND Release 2.0 Analog Multiline Telephone
Brand: AT&T Pages: 794
Hyundai MSR 568 D3 User Manual preview
MSR 568 D3
Brand: Hyundai Pages: 88
HandyTrac Key Control Installation And Operation Manual preview
Key Control
Brand: HandyTrac Pages: 20
Duro Dyne 35234 Installation Instructions Manual preview
35234
Brand: Duro Dyne Pages: 16
AEG MC 4410 Instruction Manual & Guarantee preview
MC 4410
Brand: AEG Pages: 54
AEG MC 4421 N CD/MP3 Instruction Manual preview
MC 4421 N CD/MP3
Brand: AEG Pages: 42
AEG MC 4400 Instruction Manual & Guarantee preview
MC 4400
Brand: AEG Pages: 40
AEG MC 4401 CD Instruction Manual & Guarantee preview
MC 4401 CD
Brand: AEG Pages: 51

Brands by name

Popular brands

Load more brands