Startup and Administration HiPath 5000
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
6-10
HiPath 3000/5000 V9, Service documentation
start_h5.fm
Server Networking
6.5
Server Networking
6.5.1
Features of IP Networking
Transparent for End Users
●
No special telephones are required, as the conversion of voice into IP packets takes place
in the LAN gateway rather than in the telephone.
●
The transfer of the general network features has no effect on the way the telephones are
used, and therefore does not restrict the convenience of the telephone functions in any
way.
●
DTMF signals: DTMF signals are supported. It is therefore possible to have suffix dialing
or to listen to voice mail over the IP network.
Support of Network-wide Features
HiPath 5000 supports the CorNet NQ protocol; in this process CorNet NQ-specific features are
transmitted over the IP network (tunneling).
The following applies: The features that are currently transmitted in a HiPath 3000 corporate
network are also supported by HiPath 5000 with some enhancements in comparison to con-
ventional networking. (see General Features).
Central Attendant Console
A central attendant console can be used in HiPath 2000/HiPath OpenOffice EE / HiPath 3000
/ HiPath 5000 networks. Platform-wide busy signaling is also possible.
Automatic Routing
HiPath 5000 can perform automatic routing to a backup or alternative network for new connec-
tions. A voice network (such as ISDN dial-up connection) can also be used as a backup net-
work. This ensures that the high availability of HiPath is not affected by the use of IP networks
for the transfer of voice and fax connections. Automatic routing is initiated if
●
the communication platform selected is not accessible (for example because of an error or
overload in the IP network).
●
there is no more capacity available in LAN accesses (maximum number of B channels for
LAN gateway exceeded)
>
Note
The cross-communication platform busy signaling feature is only available with op-
tiClient Attendant.
HiPath 5000 (Presence Manager) is not necessary for this purpose.
Summary of Contents for HiPath 3000 Series
Page 1252: ......
