service.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
12-121
Nur für den internen Gebrauch
Service
Security Features
– A2-1 = APSXF started
– A2-2 = APSXF ended
– A2-3 = APS boot (
also included)
●
HiPath 3000/5000 Manager E Maintenance (6)
Maintenance activities which can be assigned with the following command entries are
logged:
– B1-1 = Read error memory
– B1-2 = Delete error memory
– B2-1 = Out of service
– B3-1 = Read Direct Memory Access
– B3-2 = Write Direct Memory Access
– B4-1 = Delete base station status overload
– B4-2 = Delete base station restart
– B5-1 = Digital loopback change
– B6-1 = Trunk rolling change
– B7-1 = Read trunk status
– B8-1 = Delete trunk error counter
●
Simulated or pseudo Assistant T format (7)
The HiPath 3000/5000 Manager E records the offline changes of a CDB as a “simulated”
Assistant T command. For data areas subject to change by HiPath 3000/5000 Manager E,
pseudo areas are generated. When loading an offline CDB into the system, the following
simulated commands are logged as command entries:
C1 = Pseudo area “System parameter”
– C1-1 System fags/CMI
– C1-2 System intercept/AC
– C1-3 Tones and calls
– C1-4 Direction flag special (Variable direction#)
– C1-5 System settings
– C1-6 Host Link Interface
– C1-7 Relocate activation
C2 = Pseudo area “System timer”
– C2-1 System timer
C3 = Pseudo area “S
0
configuration”
– C3-1 Station bus
– C3-2 Line supervision
– C3-3 Mode
C4 = Pseudo area “Lines”
– C4-1 Loop start parameter (Variable Slot/Line#)
C5 = Pseudo area “Digit analysis”
– C5-1 Internal number (Variable Stn#, Grp#)
– C5-2 Service codes
C6 = Pseudo area “Daylight saving time”
– C6-1 Daylight saving time
Summary of Contents for HiPath 3000 Series
Page 1252: ......
