Service
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
12-14
HiPath 3000/5000 V9, Service documentation
service.fm
Installation and administration of Plug PC for HiPath 3000 Remote Access Appliance
12.2.7.3
Downloading the trace files
Once the problem you wanted to trace has occured, you may download the trace files.
Procedure
1.
Click Stop either on "X-Tracer" or on "Network capture" window. The trace is stopped.
2.
Go to Download file(s) and save them to your local PC.
3.
Delete the files on the USB stick by clicking Delete file(s).
12.2.8
Status window
In the Status window, information about the USB stick (active and space left), X-Tracer (active
yes or no), and the network trace (active yes or no) is displayed.
Procedure
1.
Click Administration > Status. The "Status" window opens. It consists of the "Filesystem",
"X-Tracer", and "Network capture" section.
12.2.9
Information window
The Information window displays the current software version running on your plug PC.
Procedure
1.
Click Administration > Information. An information window opens.
12.2.10
Reset SSDP Service Plugin
The reset is required because it puts the SSDP Service Plugin into a state, before it has been
activated (e.g. without any configuration like partner-id, proxy, etc.).
Procedure
1.
Click Administration > Maintenance. The "Maintenance" window opens, which consists
of the "Get Log Files", "Delete Log Files", "Reset service plugin", "Restore factory settings
for Smart Services", and "Unmount USB-Stick" sections. Every section contains a Start
button.
2.
In the "Reset service plugin" section, click Start.
Summary of Contents for HiPath 3000 Series
Page 1252: ......
