sysdat.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
2-29
Nur für den internen Gebrauch
System Data
HiPath 3000
Boards for Tie Trunk Traffic
3
The maximum number is calculated on the basis of the system-specific capacity limits, See Section 2.3, “System-Specific
Capacity Limits for HiPath 3000, HiPath 5000”.
Table 2-12
Tie Trunk Traffic Boards for HiPath 3550
Board
Name
Capacity
Coun-
try
Type/Description
P
o
rt
s per board
B channels per board
Max. n
u
mber of
boards per system
RO
W
USA
HXGS3
2
8
3
x
x HG 1500 board for connecting the HiPath 3550 system di-
rectly to a local data network (Ethernet).
STLS2
2
4
#
1
1
The maximum number is calculated on the basis of the system-specific capacity limits, See Section 2.3, “System-Specific
Capacity Limits for HiPath 3000, HiPath 5000”.
x
-
Board for ISDN basic rate access.
Configuration of ISDN trunks, tie trunks, and stations (no
feeding) on the same board is possible.
STLS4
4
8
#
x
x
TS2N
30 30
1
x
-
Board for primary rate access; can be used for tie trunk traf-
fic.
In HiPath 3000/5000 V5.0 and later, the B channels in the
TS2N board are subject to license. Consequently, the TS2N
boards (S30810-Q2913-X300) have been assigned a new
hardware identification code. The new code prevents the
board from being used in earlier versions. Functionality and
layout of the board have not been changed.
Summary of Contents for HiPath 3000 Series
Page 1252: ......
