HiPath 3000/5000 in the LAN Network
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
13-18
HiPath 3000/5000 V9, Service documentation
h3h5_in_the_lan.fm
HG 1500 Board
●
System Speed Dialing
A redundant central speed-dial directory is maintained from which the local speed-dial di-
rectories of all nodes is updated. This means that IP telephones connected to the HG 1500
have access to the speed-dials as TDM phones.
●
CO Call Privileges and Toll Restriction
The call privileges configured per node is transferred via CorNet-N in converted format.
Permitted and denied lists of a station can only be evaluated in the node in which the sta-
tion is configured. The dial plan can be used to specify where the toll restriction is to be
executed. Please note that in this process all allowed numbers and denied numbers lists
are mapped to “Can access local public network”. This in turn is mapped to denied num-
bers list 1 in a subsequent node. Consequently, it is possible that in a subsequent node a
toll restriction with denied numbers list 1 will be set up again or added.
●
Least Cost Routing (LCR)
LCR is possible via both the trunk connections and the IP connections. The dial plans of
each node can be configured individually. If so configured, “Fallback to SCN” function can
be used to forward a call automatically to an SCN connection if the IP connection fails.
When an external call is forwarded to another node (transit break-in), the caller’s number
is converted automatically to the international format.
The seizures codes used to date are replaced by port numbers. This type of configuration
is better suited for a LAN environment.
●
Music on Hold (MOH)
In a HiPath server node, a PCM/IOM channel can be permanently connected to MOH. This
channel is permanently connected to a DSP channel that forwards MOH unidirectionally to
one or more IP clients or other HG 1500 boards. MOH for IP clients always requires only
one DSP channel. (Normal clients cannot benefit from this; for MOH, they require an addi-
tional a PCM/IOM and a DSP channel respectively.)
The channel for MOH is automatically assigned by the system.
●
Direct Station Select (DSS) and Busy Lamp Field (BLF)
The DSS functionality - signaling of call-processing station states – is available to all ter-
minals in the system, also to those on different nodes. This provides a system-wide call
pickup solution, and is completely transparent to the terminal user programming the DSS
keys.
●
SIP-Q
From HiPath 3000/5000 V7 or later, networking via SIP-Q V2 with HiPath 2000/HiPath
OpenOffice EE, HiPath 3000, HiPath 4000, HiPath 5000 and OpenScape Voice is possi-
ble.
Summary of Contents for HiPath 3000 Series
Page 1252: ......
