Service
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
12-44
HiPath 3000/5000 V9, Service documentation
service.fm
Guided Maintenance
12.4.7
Trace Options and Evaluations in Connection with SRTP
The Secure Realtime Transport Protocol (SRTP) is the secure version of the RTP protocol. It
is used in IP telephony for transferring encrypted voice traffic.
Data can be encrypted from:
●
gateway to gateway
●
gateway to workpoint client
●
workpoint client to workpoint client
This results in two scenarios:
●
Encrypted signaling from gateway to gateway: CorNet NQ is encrypted.
Firstly, the connection is set up via H.323. The CorNet NQ container is then sent in encrypt-
ed form via the IP network.
Traces can be performed as usual, but do not include data in the CorNet NQ container (for
example, signaling messages, station number information).
●
Encrypted payload from workpoint client to workpoint client and from gateway to workpoint
client: CorNet TS is encrypted.
The connection setup via CorNet TC is already partially encrypted. The CorNet TS data
records contained in this setup are completely encrypted. This means that voice data (in-
cluding DTMF tones) is transmitted in encrypted form. In the case of data connections, the
data is encrypted for transmission. If RFC2833 is activated (this must be activated if secu-
rity is activated), information about key actions (user input indication) on the workpoint cli-
ent is also encrypted and transmitted.
The rest of the CorNet TC message is not encrypted. Messages that do not contain CorNet
TS data records are not encrypted either.
During a trace, the RTP data flow can be read out as usual. Voice quality cannot be eval-
uated due to payload encryption.
Summary of Contents for HiPath 3000 Series
Page 1252: ......
