Siemens HiPath 3000 Series, Service Documentation

Page: 225 / 1302

boards.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
3-93
Nur für den internen Gebrauch
Boards for HiPath 3000
Peripheral boards
BGx_0A,
BGx_0B X1-02, X1-26
X1-06, X1-08
X1-10, X2-02
X2-04, X2-06
X2-08, X2-10
X3-02, X3-04
X3-06, X3-08
X3-10, X4-02 Sets 0 to 7 AB pair Not connected
HO0 … HO3 X8-22, X7-30, X8-44,
X8-42 Old PCM lines (2.048 Mbps) Input
HI0 … HI3 X9-24, X9-02, X9-44,
X9-42 Old PCM lines (2.048 Mbps) Output
WHO0 … WHO3 X6-32, X6-33, X6-34,
X6-35 New PCM lines (2.048 Mbps) Input
WHI0 … WHI3 X7-31, X7-32, X7-33,
X7-34 New PCM lines (2.048 Mbps) Output
HDI X9-06 HDLC lines Input
HDO X8-04 HDLC lines Output
PRS X7-26 System reset Input
BA0 … BA6 X7-06, X7-28, X8-26
X8-28, X9-04, X8-06,
X8-2 Frame address recognition Input
FMB X9-22 Clock synchronization signal Input
CKA X8-08 System clock (2.048 MHz) Input
(CLS) X8-10 Clock selection
(CLS=GND --> CKA=2.048 MHz)
The (CLS) pin should be
earthed on the backplane.
Input
RCLK X7-02 Reference clock Output
RAC X7-04 Reference clock activation
Low-active for activating RCLK
Tristate for deactivating CLK Output tristate
LWLOOP X4-04 Output for result of self-check Not connected
TOUT X6-48 Output for result of self-check Not connected
TCK X7-44 Boundary scan: check clock Not connected
Signal Name Connector contact Signal description Direction
Table 3-36 SIPAC Connector Contact Assignment